HP ProCurve 5400zl Reference Manual page 283

Command Line Interface Reference Guide
Usage: [no] ip forward-protocol udp IP-ADDR PORT-NUM|PORT-NAME
Description: Add or remove a UDP server address for the VLAN. The
Next Available Option:
ip-addr -- IP address of the protocol server. (IP-ADDR)
■
unblock
■ interface vlan VLAN-ID connection-rate-filter unblock
Resets a host previously blocked by the connection rate filter
Next Available Options:
all -- Resets all previously blocked by the connection rate filter
■
host -- Match packets from the specified IP address. (IP-ADDR)
■
src-ip -- Match packets from the specified subnet. (IP-ADDR/mask-LENGTH)
■
■ interface svlan VLAN-ID connection-rate-filter unblock
Resets a host previously blocked by the connection rate filter
Next Available Options:
all -- Resets all previously blocked by the connection rate filter
■
host -- Match packets from the specified IP address. (IP-ADDR)
■
src-ip -- Match packets from the specified subnet. (IP-ADDR/mask-LENGTH)
■
unknown-vlans
■ interface [ETHERNET] PORT-LIST unknown-vlans < Learn | Block | Disable >
Usage: unknown-vlans <learn|block|disable>
Description: Configure GVRP on the port(s).
Supported Values:
■ Learn -- Learn new VLANs.
■ Block -- Ignore new VLANs.
■ Disable -- Ignore all GVRP packets.
© 2009 Hewlett-Packard Development Company, L.P.
broadcast packets received by the switch on this VLAN are to
be forwarded to the specified application server.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
If 'learn' is specified then the port will accept join
requests for new VLANs on this port and propagate a VLAN
join requests through all other forwarding ports that are
participating in GVRP.
If 'block' is specified then the port will only process
GRVP packets that concern themselves with known VLANs.
If 'disable' is specified then all GRVP packets will be
ignored.
This is an Interface context command. It can be called directly
from the interface context or follow the 'interface [ethernet]
PORT-LIST' command.
(p. 241)
(p. 219)
(p. 237)
(p. 277)
(p. 219)
(p. 237)
(p. 277)
interface
281