HP ProCurve 5400zl Reference Manual page 606

Command Line Interface Reference Guide
■ show dhcp-relay bootp-gateway vlan
Show the configured BOOTP Gateway for VLAN.
Next Available Option:
vlan -- (VLAN-ID)
■
■ show dhcp-relay bootp-gateway vlan VLAN-ID
■ show instrumentation cam vlan
Usage: show instrumentation [<group>] [port|vlan <num>]
Description: Show internal version-dependant counters for debugging for thespecified
port or vlan number.
Next Available Option:
vlanNum
■
thespecified port or vlan number (NUMBER)
■ show instrumentation vlan
Usage: show instrumentation [<group>] [port|vlan <num>]
Description: Show internal version-dependant counters for debugging for thespecified
port or vlan number.
Next Available Option:
vlanNum
■
thespecified port or vlan number (NUMBER)
■ show ip helper-address vlan VLAN-ID
Specify a vlan for which to show server addresses.
■ show ip forward-protocol vlan VLAN-ID
Specify a vlan for which to show server addresses.
■ show ip igmp VLAN-ID
Show IGMP operational information for the VLAN specified.
Next Available Option:
config -- Show IGMP configuration information for the VLAN
■
■ show ip ospf statistics vlan VLAN-ID
Specify VLAN of the interface for which to show detailed information.
■ show ip ospf interface vlan VLAN-ID
Specify VLAN of the interface for which to show detailed information.
■ show ip rip interface vlan VLAN-ID
© 2009 Hewlett-Packard Development Company, L.P.
(p. 603)
< 1 to 2048 > -- Show internal version-dependant counters for debugging for
< 1 to 2048 > -- Show internal version-dependant counters for debugging for
(p. 607)
(p. 607)
specified.(p. 540)
show
604