Command Line Interface Reference Guide
Next Available Option:
dscp
-- Define Differentiated Services Codepoint to which to map IP
■
integer-range
■ qos device-priority IP-ADDR dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos device-priority IP-ADDR/mask-LENGTH dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos device-priority IPV6-ADDR dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos device-priority IPV6-ADDR/PREFIX-LEN dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ [no] qos dscp-map < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
Next Available Options:
priority
< 0 | 1 | 2 | ... > -- Specify priority to use.
■
name
-- Specify DSCP->priority mapping name.
■
■ qos < udp-port | tcp-port > TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv4 TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv4 range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv6 TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv6 range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
© 2009 Hewlett-Packard Development Company, L.P.
ToS.(p. 418)
(p. 428)
(p. 426)
qos
423