HP ProCurve 5400zl Reference Manual page 564

Command Line Interface Reference Guide
IP-ADDR
■ show ip mroute IP-ADDR
Usage: show ip mroute [GRP-ADDR SRC-ADDR]
Description: Show detailed information for the specified entry from the IP
Next Available Option:
IP-ADDR
■
■ show ip mroute IP-ADDR IP-ADDR
Specify the source IP address of the MRT entry.
■ show ip pim mroute IP-ADDR
Specify the IP multicast group address of the MRT entry.
Next Available Option:
IP-ADDR
■
■ show ip pim mroute IP-ADDR IP-ADDR
Specify the source IP address of the MRT entry.
■ show ip pim neighbor IP-ADDR
Specify the IP address of the PIM neighbor to show.
ip-recv-mac-address
■ show ip-recv-mac-address
Show VLAN L3-Mac-Address table.
ipv4
■ show class ipv4 IPV4
Enter ipv4 class.
ipv6
■ show ipv6
Usage: show ipv6
Description: Show the device IPv6 configuration. Invoked without parameters
Next Available Options:
vlan -- Show IPv6 status information for all
■
© 2009 Hewlett-Packard Development Company, L.P.
multicast routing table. GRP-ADDR is the IP multicast group
address and SRC-ADDR is the source IP address of the entry.
-- Specify the source IP address of the MRT entry. (IP-ADDR)
-- Specify the source IP address of the MRT entry. (IP-ADDR)
shows IPv6 configuration for the switch or all VLANs. When
followed by a parameter displays information for a particular
IPv6 protocol or feature. To get a list of all possible
parameters use 'show ipv6 ?'.
VLANs(p. 603)
show
(p. 562)
(p. 562)
562