HP ProCurve 5400zl Reference Manual page 234

Command Line Interface Reference Guide
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ interface vlan VLAN-ID qos dscp
Specify DSCP policy to use.
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ interface svlan VLAN-ID qos dscp
Specify DSCP policy to use.
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
enable
■ interface [ETHERNET] PORT-LIST enable
Usage: enable
Description: Enable port(s).
■ [no] interface vlan VLAN-ID ipv6 enable
Enable IPv6 on an interface and configures an automatically generated link-local addr.
■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > enable
Usage: [no] vrrp vrid <VRID> enable
Description: Enable/disable operation of the virtual router instance.
■ [no] interface svlan VLAN-ID ipv6 enable
Enable IPv6 on an interface and configures an automatically generated link-local addr.
eui-64
■ [no] interface vlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN eui-64
© 2009 Hewlett-Packard Development Company, L.P.
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 285)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 285)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 285)
This is an Interface context command. It can be called directly
from the interface context or follow the 'interface [ethernet]
PORT-LIST' command.
The default value is 'disabled'.
interface
(p. 239)
(p. 227)
(p. 239)
(p. 227)
(p. 239)
(p. 227)
232