HP ProCurve 5400zl Reference Manual page 108

Command Line Interface Reference Guide
xmodem
■
usb -- Copy data to a USB flash
■
command-file
■ copy tftp command-file
Copy command script to switch and execute.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy xmodem command-file
Copy command script to switch and execute.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy usb command-file
Copy command script to switch and execute.
Next Available Option:
filename
■
command-output
■ copy command-output COMMAND-OUTPUT
Specify a CLI command to copy output of.
Next Available Options:
tftp -- Copy data to a TFTP
■
xmodem
■
usb -- Copy data to a USB flash
■
config
■ copy tftp config CONFIG
Copy data to specified configuration file.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy xmodem config CONFIG
© 2009 Hewlett-Packard Development Company, L.P.
-- Use xmodem on the terminal as the data
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
style.(p. 131)
style.(p. 120)
-- Specify filename for the USB transfer. (ASCII-STR)
server.(p. 124)
-- Use xmodem on the terminal as the data
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
destination.(p. 135)
drive.(p. 133)
(p. 126)
destination.(p. 135)
drive.(p. 133)
(p. 126)
(p. 129)
(p. 109)
(p. 129)
copy
106