HP ProCurve 5400zl Reference Manual page 189

Command line interface, switch software
Hide thumbs Also See for ProCurve 5400zl:
Table of Contents

Advertisement

Command Line Interface Reference Guide
Next Available Option:
forward
PORT-LIST)
■ filter multicast MAC-ADDR drop [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of filtered packets is not permitted.
■ filter protocol < ip | ipx | arp | ... > drop [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of filtered packets is not permitted.
filter-action
■ filter connection-rate [ETHERNET] PORT-LIST < block | notify-only | throttle >
Supported Values:
■ block -- Disable the host until an administrator explicitly re-enables access.
■ notify-only -- Log a message/send a SNMP trap when the filter is tripped.
■ throttle -- Deny network access for a period before automatically re-enabling access.
forward
■ filter source-port named-filter ASCII forward [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of filtered packets is permitted.
■ filter source-port [ETHERNET] PORT-LIST forward [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of filtered packets is permitted.
Next Available Option:
drop
-- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
PORT-LIST)
■ filter source-port [ETHERNET] PORT-LIST drop [ETHERNET] PORT-LIST forward [ETHERNET]
PORT-LIST
Set a list of ports to which forwarding of filtered packets is permitted.
■ filter multicast MAC-ADDR forward [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of filtered packets is permitted.
■ filter protocol < ip | ipx | arp | ... > forward [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of filtered packets is permitted.
multicast
■ [no] filter multicast MAC-ADDR
Usage: [no] filter multicast MAC-ADDR [...]
Description: Specify multicast filter to manage.
© 2009 Hewlett-Packard Development Company, L.P.
-- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
(p. 187)
(p. 186)
If preceded by 'no' the command deletes the filter specified.
Otherwise, the filter is added to the system, if
it is not already there. Also, an action to apply to the
filter
187

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 3500ylProcurve 8200zl6200yl

Table of Contents