HP ProCurve 5400zl Reference Manual page 623

Command Line Interface Reference Guide
Range: < 1 to 21474836 >
■ snmp-server host IPV6-ADDR informs timeout < 1 to 21474836 >
Specify the interval between retries for informs, in seconds.
Range: < 1 to 21474836 >
traps
■ [no] snmp-server enable traps
Usage: [no] snmp-server enable traps snmp-authentication <standard | extended>
[no] snmp-server enable traps port-security
[no] snmp-server enable traps login-failure-mgr
[no] snmp-server enable traps password-change-mgr
[no] snmp-server enable traps authorization
[no] snmp-server enable traps arp-protect
[no] snmp-server enable traps dhcp-snooping
[no] snmp-server enable traps dyn-ip-lockdown
[no] snmp-server enable traps link-change <PORT-LIST>
Description: Enable/disable event traps to be sent
Next Available Options:
link-change
■
snmp-authentication
■
dhcp-snooping
■
arp-protect
■
dyn-ip-lockdown
■
auth-server-fail
■
password-change-mgr
■
login-failure-mgr
■
port-security
■
trap-source
■ [no] snmp-server trap-source
Usage: [no] snmp-server trap-source [IP-ADDR|loopback<0-7>]
Description: Specify the source ip-address policy for the trap pdu.
IP-ADDR
loopback 0-7
Next Available Options:
ip-addr -- IP Address for the source ip address field in the trap pdu. (IP-ADDR)
■
loopback
■
ip address will be used as the source ip address in the trap
© 2009 Hewlett-Packard Development Company, L.P.
by the switch.
-- Traps for link-up and link-down. ([ethernet] PORT-LIST)
-- Select RFC-1157 (standard) or HP-ICF-SNMP (extended)
-- Traps for DHCP-Snooping.(p. 616)
-- Traps for Dynamic ARP
-- Traps for Dynamic Ip
-- Traps reporting authentication server
-- Traps for management interface password
-- Traps for management interface login
-- Traps for port access authentication
By default snmp trap pdu will contain the ip address of
the active interface on which trap will be sent. The default
behavior is in compliance to rfc-1517.
The no form of the command will revert to default behavior.
-- ip-address specified will be used as the source ip
address in the generated trap.
-- lexicographically minimum configured ip address on the
specified interface will be used as the source ip
address in the generated trap pdu.
< 0 to 7 > -- For the specified loopback interface, lexicographically minimum configured
Protection.(p. 615)
Lockdown(p. 616)
unreachable.(p. 615)
failure.(p. 619)
failure.(p. 619)
pdu.(p. 619)
snmp-server
(p. 618)
traps.(p. 620)
change.(p. 619)
(p. 618)
621