HP ProCurve 5400zl Reference Manual page 304

Command Line Interface Reference Guide
Specify how often (in minutes) the switch tries to get the current time.
Range: < 1 to 9999 >
ip
■ ip source-binding VLAN-ID IP-ADDR
Next Available Option:
mac -- (MAC-ADDR)
■
ip6addr
■ [no] ip dns server-address priority < 1 to 2 > IPV6-ADDR
DNS server IPv6 address.
ipaddr
■ ip default-gateway IP-ADDR
IPv4 address of the default gateway.
■ [no] ip dns server-address priority < 1 to 2 > IP-ADDR
DNS server IP address.
■ ip router-id IP-ADDR
Usage: ip router-id IP-ADDR
[no] ip router-id
Description: Define the device router id.
ip-addr
■ [no] ip address IP-ADDR/MASK-LENGTH
Interface IP address/mask.
■ ip route IP-ADDR/MASK-LENGTH
Specify IP address and mask of the route destination.
Next Available Options:
ip-addr -- Specify gateway IP address. (IP-ADDR)
■
vlan -- Specify the destination VLAN. (VLAN-ID)
■
reject -- Specify that packets are discarded and ICMP error is returned to
■
blackhole
■
■ [no] ip route IP-ADDR/MASK-LENGTH IP-ADDR
Specify gateway IP address.
Next Available Option:
distance
■
298)
© 2009 Hewlett-Packard Development Company, L.P.
(p. 304)
The no form of the command clears the router-id.
-- Specify that packets are silently discarded with no ICMP message
< 1 to 255 > -- Set the administrative distance to associate with this static
(p. 302)
(p. 312)
ip
sender.(p. 306)
sent.(p. 296)
route.(p.
302