HP ProCurve 5400zl Reference Manual page 255

Command Line Interface Reference Guide
Parameters:
Next Available Option:
all < In | Out | Both > -- Monitor all
■
■ [no] interface vlan VLAN-ID monitor
Usage: 1) [no] monitor all <in|out|both> mirror <1-4 | NAME-STR>
2) [no] monitor ip access-group <ACL-NAME> <in> mirror
Description: Define either the VLAN is to be monitored or not.
Parameters:
Next Available Option:
all < In | Out | Both > -- Monitor all
■
■ [no] interface svlan VLAN-ID monitor
Usage: 1) [no] monitor all <in|out|both> mirror <1-4 | NAME-STR>
2) [no] monitor ip access-group <ACL-NAME> <in> mirror
Description: Define either the VLAN is to be monitored or not.
Parameters:
© 2009 Hewlett-Packard Development Company, L.P.
some frames may not be copied to the mirroring port.
This is an Interface context command. It can be called directly
from the interface context or follow the 'interface [ethernet]
PORT-LIST' command.
o 1-4 - Mirror destination number
o NAME-STR - Friendly name associated with the mirror
destination number.
o ACL-NAME - Standard or Extended Access Control List number.
o <in|out|both> direction of the traffic to be monitored.
[1-4 | NAME-STR]...
<1-4 | NAME-STR> [1-4 | NAME-STR]...
The network traffic seen by the monitored VLAN is copied to
the Mirroring Destination to which a network analyzer can be
attached.
Note: When mirroring a VLAN in a busy network,
some frames may not be copied to the mirroring port.
This is an VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID command.
o 1-4 - Mirror destination number
o NAME-STR - Friendly name associated with the mirror
destination number.
o ACL-NAME - Standard or Extended Access Control List number.
o <in|out|both> direction of the traffic to be monitored.
[1-4 | NAME-STR]...
<1-4 | NAME-STR> [1-4 | NAME-STR]...
The network traffic seen by the monitored VLAN is copied to
the Mirroring Destination to which a network analyzer can be
attached.
Note: When mirroring a VLAN in a busy network,
some frames may not be copied to the mirroring port.
This is an VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID command.
o 1-4 - Mirror destination number
o NAME-STR - Friendly name associated with the mirror
traffic.(p. 219)
traffic.(p. 219)
interface
253