HP ProCurve 5400zl Reference Manual page 670

Command Line Interface Reference Guide
Usage: [no] ip ...
Description: Configure various IP parameters for the VLAN. The 'ip'
Next Available Options:
access-group
■
663)
address
■
ip-addr
■ [no] svlan VLAN-ID ip address IP-ADDR/mask-LENGTH
Interface IP address/mask.
ipv6
■ svlan VLAN-ID ipv6
Usage: [no] ipv6 ...
Description: Configure various IP parameters for the VLAN. The 'ipv6'
Next Available Options:
enable -- Enable IPv6 on an interface and configures an automatically generated link-local
■
addr.(p. 667)
address
■
ipv6-addr
■ [no] svlan VLAN-ID ipv6 address IPV6-ADDR
Configure a link-local IPv6 address.
Next Available Option:
link-local
■
ipv6-addr/mask
■ [no] svlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN
Configure IPv6 address represented in CIDR notation.
© 2009 Hewlett-Packard Development Company, L.P.
command must be followed by a feature-specific keyword.
Use 'ip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
-- Apply the specified access control list on this VLAN interface (ASCII-STR)
-- Set IP parameters for communication within an IP
command must be followed by a feature-specific keyword.
Use 'ipv6 ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
-- Set IPv6 parameters for communication within an IP
-- Configure a link-local IPv6 address.(p. 669)
network(p. 664)
network(p. 664)
svlan
(p.
668