HP ProCurve 5400zl Reference Manual page 247

Command Line Interface Reference Guide
Usage: [no] ipv6 ...
Description: Configure various IP parameters for the VLAN. The 'ipv6'
Next Available Options:
enable -- Enable IPv6 on an interface and configures an automatically generated link-local
■
addr.(p. 232)
address
■
ipv6-addr
■ [no] interface vlan VLAN-ID ipv6 address IPV6-ADDR
Configure a link-local IPv6 address.
Next Available Option:
link-local
■
■ [no] interface svlan VLAN-ID ipv6 address IPV6-ADDR
Configure a link-local IPv6 address.
Next Available Option:
link-local
■
ipv6-addr/mask
■ [no] interface vlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN
Configure IPv6 address represented in CIDR notation.
Next Available Options:
anycast
■
nodes(p. 221)
eui-64 -- An IPv6 EUI-64 address that can be automatically configured on any
■
■ [no] interface svlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN
Configure IPv6 address represented in CIDR notation.
Next Available Options:
anycast
■
nodes(p. 221)
eui-64 -- An IPv6 EUI-64 address that can be automatically configured on any
■
© 2009 Hewlett-Packard Development Company, L.P.
command must be followed by a feature-specific keyword.
Use 'ipv6 ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
-- Set IPv6 parameters for communication within an IP
-- Configure a link-local IPv6
-- Configure a link-local IPv6
-- Address that is assigned to a set of interfaces that typically belong to different
-- Address that is assigned to a set of interfaces that typically belong to different
address.(p. 248)
address.(p. 248)
network(p. 216)
interface(p. 232)
interface(p. 232)
interface
245