Command Line Interface Reference Guide
mac-list1
■
([ethernet] PORT-LIST)
addr-limit
■
(default 1). (NUMBER)
addr-moves
■
moves).
auth-vid
■
configured by default).
■
logoff-period
■
considers an implicit logoff (default 300 seconds). (NUMBER)
max-requests
■
authentication requests (default 3). (NUMBER)
quiet-period
■
authenticate (default 60 seconds). (NUMBER)
reauthenticate
■
reauth-period
■
'0' to disable re-authentication (default 0). (NUMBER)
server-timeout
■
30 seconds). (NUMBER)
unauth-vid
■
connected (not configured by default).
■
PORT-LIST
■
(p. 43)
controlled-direction
■
ports; in BOTH directions (ingress+egress) or IN only (ingress). (NUMBER)
supplicant
■
auth-timeout
■
(p. 30)
clear-statistics
■
held-period
■
identity
■
secret
■
initialize
■
max-start
■
authentication (default 3). (NUMBER)
secret
■
start-period
■
(default 30sec.). (NUMBER)
web-based
■
device's port(s)
dhcp-addr
■
default is 192.168.0.0, mask default is 24 - 255.255.255.0). (IP-ADDR/MASK-LENGTH)
dhcp-lease
■
(NUMBER)
ewa-server
■
device.
host-name
■
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Manage MAC address based network authentication on the device port(s).
(p. 39)
< 1 to 32 > -- Set the port's maximum number of authenticated MAC addresses
(p. 27)
-- Set whether the MAC can move between ports (default disabled - no
(p. 27)
-- Configures VLAN where to move port after successful authentication (not
(p. 30)
VLAN-ID
-- Configures VLAN where to move port after successful authentication (not
configured by default). (VLAN-ID)
< 1 to 9999999 > -- Set the period of time of inactivity that the switch
< 1 to 10 > -- Set maximum number of times the switch retransmits
< 1 to 65535 > -- Set the period of time the switch does not try to
-- Force re-authentication to happen.
< 0 to 9999999 > -- Set the re-authentication timeout in seconds; set to
< 1 to 300 > -- Set the authentication server response timeout (default
(p. 50)
-- Configures VLAN where to keep port while there is an unauthorized client
VLAN-ID
-- Configures VLAN where to keep port while there is an unauthorized client
connected (not configured by default). (VLAN-ID)
-- Manage general port security features on the device port(s). ([ethernet] PORT-LIST)
< both | in > -- Configure how traffic is controlled on non-authenticated
-- Manage 802 ([ethernet] PORT-LIST)
< 1 to 300 > -- Set the challenge reception timeout (default 30sec.). (NUMBER)
-- Clear the supplicant statistics.
< 0 to 65535 > -- Set the held period (default 60sec.). (NUMBER)
-- Set the identity(user name) to be used by the supplicant. (ASCII-STR)
--
(p. 50)
-- Reinitialize the supplicant state machine.
< 1 to 10 > -- Define the maximum number of attempts taken to start
-- Trigger the command to ask user for a password for the supplicant to use.
< 1 to 300 > -- Set a period of time between EAPOL-Start packet retransmission
(p. 51)
-- Configure web authentication based network authentication on the device or the
(p. 55)
-- Set the base address / mask for the temporary pool used by DHCP (base address
< 5 to 25 > -- Set the lease length of the IP address issued by DHCP (default 10).
(p. 33)
-- IP address or hostname of the enhanced web authentication server on the
(p. 34)
-- Hostname of the enhanced web auth server. (ASCII-STR)
page-path
-- Sets the path of the login pages to be found on the ewa server.
(ASCII-STR)
(p. 42)
(p. 54)
(p. 39)
(p. 47)
(p. 47)
(p. 47)
(p. 53)
(p. 54)
(p. 51)
(p. 31)
(p. 35)
(p. 40)
aaa
(p. 36)
(p. 32)
(p. 35)
(p. 35)
(p. 50)
(p. 33)
(p. 35)
24