HP ProCurve 5400zl Reference Manual page 673

Command Line Interface Reference Guide
protocol-group
■ [no] svlan VLAN-ID protocol PROTOCOL-GROUP
Enter a list of protocols for the current VLAN delimited by commas.
protocols
■ [no] svlan VLAN-ID protocol < IPX | IPv4 | IPv6 | ... >
Set a predefined protocol for the current VLAN.
Supported Values:
■ IPX -- IPX Protocol Group
■ IPv4 -- IP version 4 Protocol Group
■ IPv6 -- IP version 6 Protocol Group
■ ARP -- Address Resolution Protocol Group
■ Appletalk -- Appletalk Protocol Group
■ SNA -- System Network Architecture Protocol Group
■ NetBEUI -- Network BIOS Enhanced User Interface Protocol Group
qos
■ [no] svlan VLAN-ID qos
Usage: [no] qos [dscp <0|1...63|af11|af12|af13|af21|af22|af23|af31|af32|
Description: Set VLAN-based priority. The 'dscp' or 'priority' must
Next Available Options:
dscp -- Specify DSCP policy to use.
■
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
■
rapid-commit
■ [no] svlan VLAN-ID ipv6 address dhcp full rapid-commit
Obtain IPv6 address quickly from DHCPv6 server.
src-ip
■ svlan VLAN-ID connection-rate-filter unblock IP-ADDR/mask-LENGTH
Match packets from the specified subnet.
tagged
■ [no] svlan VLAN-ID tagged [ETHERNET] PORT-LIST
Usage: [no] tagged [ethernet] PORT-LIST
© 2009 Hewlett-Packard Development Company, L.P.
af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111> |
priority <0-7>]
be specified if 'no' is not used. Using 'no' configures
the switch not to apply a VLAN priority override to this
VLAN's packets.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
(p. 666)
(p. 670)
svlan
671