HP ProCurve 5400zl Reference Manual page 562

Command Line Interface Reference Guide
■ show ip rip interface
Usage: show ip rip interface [IP-ADDR|vlan VLAN-ID]
Description: Show RIP interfaces' information. Invoked without
Next Available Options:
vlan -- Specify VLAN of the interface for which to show detailed information. (VLAN-ID)
■
if-ip -- Specify IP address of the interface for which to show detailed information. (IP-ADDR)
■
(p. 556)
■ show ip mroute interface
Usage: show ip mroute interface [VLAN-ID]
Description: Show IP multicast routing interfaces' information. Invoked
Next Available Option:
VLAN-ID
■
■ show ip pim interface
Usage: show ip pim interface [VLAN-ID]
Description: Show PIM interface information. Invoked without parameters
Next Available Option:
VLAN-ID
■
interfaces
■ show interfaces
Usage: show interfaces [config|display|brief|custom|
Description: Show port configuration and status information.
o config
o display
o brief
o [ethernet] PORT-LIST - Show summary of network traffic
o port-utilization
o custom
© 2009 Hewlett-Packard Development Company, L.P.
parameters shows all RIP interfaces configured. If the
'IP-ADDR' or the VLAN is specified detailed information
for the interface determined through the parameter is shown.
without parameters shows all IP multicast routing interfaces.
If the VLAN-ID is specified then detailed information for the
specified interface is shown.
-- Specify the VLAN ID of the IP multicast routing interface to show. (VLAN-ID)
shows all enabled PIM routing interfaces. If the VLAN-ID is
specified then detailed information for the specified interface
is shown.
-- Specify the VLAN ID of the PIM interface to show. (VLAN-ID)
[ethernet] PORT-LIST|port-utilization]
- Show configuration information.
- Show dynamic update of port counters.
- Show the ports' operational parameters.
handled by the ports.
- Show the port's bandwidth-utilization.
- Show customized set of port's data fields.
show
(p. 603)
(p. 607)
(p. 607)
560