Autorun; Overview; Notes; Command Structure - HP ProCurve 5400zl Reference Manual

OVERVIEW

Category:
Primary context:
Related Commands
Usage: [no] autorun ...
Description: Enable/Disable/Configure Autorun. Use the 'secure-mode' keyword

NOTES

Operating Notes
■ Autorun is enabled by default, until passords are set on the device.
■ Secure-mode and encryption-key are disabled by default.
■ If secure mode is disabled, the key-pair can be removed using the crypto-key zeroize
autorun command.
■ When installing the autorun certificate file and/or other key files, the files must be in PEM
format.

COMMAND STRUCTURE

■ [no] autorun
68)
key -- AES 128 encryption key string for Autorun (ASCII-STR)
■
■ [no] autorun

COMMAND DETAILS

encryption-key (p. 68)
encryption-key
■ [no] autorun encryption-key
Configure or remove an AES 128 encryption-key for Autorun
Next Available Option:
key -- AES 128 encryption key string for Autorun (ASCII-STR)
■
key
■ autorun encryption-key KEY
© 2009 Hewlett-Packard Development Company, L.P.
config
copy usb (page 133)
to enable/disable secure mode for autorun. Use the
'encryption-key' keyword to configure or remove an encryption key
(a base-64 encoded string). The encryption key is a prerequisite
for enabling autorun in secure-mode. Encryption is noted only when
the AutoRun file is also signed by an authentic source.
encryption-key -- Configure or remove an AES 128 encryption-key for Autorun
secure-mode -- Enable or disable secure mode for Autorun.
key (p. 68)

autorun

(p. 68)
(p. 69)
secure-mode (p. 69)
(p. 68)
(p.
68