OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] cdp ...
Description: Set various CDP (Cisco Discovery Protocol) parameters. Use
COMMAND STRUCTURE
■ [no] cdp
enable
■ [no] cdp
run
EXAMPLES
Example: cdp enable PORT-LIST
Disable CDP on port A1 of a Series 5400zl switch:
ProCurve(config)# no cdp enable a1
Example: cdp run
Disable CDP on the switch:
ProCurve(config)# no cdp run
COMMAND DETAILS
enable (p. 76)
enable
■ [no] cdp enable [ETHERNET] PORT-LIST
Usage: [no] cdp enable [ethernet] PORT-LIST
Description: Enable/disable CDP on particular device ports.
run
■ [no] cdp run
Usage: [no] cdp run
Description: Start and stop CDP on the device.
© 2009 Hewlett-Packard Development Company, L.P.
Routing
config
the section called cdp" (page 537)
'cdp ?' to get a list of all possible options.
-- Enable/disable CDP on particular device ports ([ethernet] PORT-LIST)
-- Start and stop CDP on the device
run (p. 76)
(p. 76)
cdp
(p. 76)
76