HP ProCurve 5400zl Reference Manual page 545

Command Line Interface Reference Guide
configuration
■ show instrumentation monitor configuration
Usage: show instrumentation monitor configuration
Description: show configured thresholds for monitored parameters.
connection-rate-filter
■ show connection-rate-filter
Usage: show connection-rate-filter [all-hosts] [blocked-hosts] [throttled-hosts]
Description: List the ports and the on/off connection-rate-filter status and
Parameters:
o all-hosts
o blocked-hosts
o throttled-hosts - Print the IP addresses of the hosts that are currently
Next Available Options:
all-hosts
■
blocked-hosts
■
throttled-hosts
■
console
■ show console
Usage: show console
Description: Show serial link/console settings.
counters
■ show ipv6 mld vlan VLAN-ID counters
Show MLD VLAN counter information.
cpu
■ show cpu
Usage: show cpu [<1-300>]
Description: Show average CPU utilization over the last 1, 5, and 60 seconds;
© 2009 Hewlett-Packard Development Company, L.P.
shows the parameter name and the configured threshold
value for all parameters.
If instrumenation monitoring for the particular paramter
is disabled then threshold for the particular parameter is
displayed as 'Not Monitored'.
sensitivity.
- Display the IP addresses of the hosts that are blocked
and throttled
- Print the IP addresses of the hosts that are currently
blocked
throttled
-- Show blocked and throttled IP
-- Show blocked IP
-- Show throttled IP
[slot <SLOT-LIST> [<1-90>] ]
or the number of seconds specified.
addresses.(p. 529)
addresses.(p. 534)
addresses.(p. 599)
show
543