HP ProCurve 5400zl Reference Manual page 52

Command Line Interface Reference Guide
secret
■ aaa port-access supplicant [ETHERNET] PORT-LIST identity IDENTITY secret
■ aaa port-access supplicant [ETHERNET] PORT-LIST secret
Trigger the command to ask user for a password for the supplicant to use.
server-timeout
■ aaa port-access authenticator [ETHERNET] PORT-LIST server-timeout < 1 to 300 >
Set the authentication server response timeout (default 30sec.).
Range: < 1 to 300 >
■ aaa port-access mac-based [ETHERNET] PORT-LIST server-timeout < 1 to 300 >
Set the authentication server response timeout (default 30 seconds).
Range: < 1 to 300 >
■ aaa port-access web-based [ETHERNET] PORT-LIST server-timeout < 1 to 300 >
Set the authentication server response timeout (default 30 seconds).
Range: < 1 to 300 >
ssh
■ aaa authentication ssh
Usage: aaa authentication ssh <enable|login>
Description: Configure authentication mechanism used to control SSH
Parameters:
Next Available Options:
enable -- Configure access to the privileged mode
■
login -- Configure login access to the
■
ssl-login
■ [no] aaa port-access web-based [ETHERNET] PORT-LIST ssl-login
Set whether to enable SSL login (https on port 443) (default disabled).
© 2009 Hewlett-Packard Development Company, L.P.
access to the switch.
o enable - Configure access to privileged mode.
o login - Configure login access.
o <primary-method> - Specifies the primary authentication
o <backup-method> -
<primary-method> [<backup-method>]
method for access control. Use <TAB>
or <?> after you specify enable or login
to get a list of all available
primary authentication methods.
Specifies an authentication method
to use, if the primary authentication
method is not able to check user's
credentials.
Use <TAB> or <?> after you specify the
primary authentication method to get a list
of all available backup methods.
commands.(p. 33)
switch.(p. 36)
aaa
50