Command Line Interface Reference Guide
■ 3
■ 4
■ 5
■ 6
■ 7
■ qos < udp-port | tcp-port > ipv6 range TCP/UDP-PORT TCP/UDP-PORT priority < 0 | 1 | 2 | ... >
Specify priority to use.
Supported Values:
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
■ qos < udp-port | tcp-port > ip-all TCP/UDP-PORT priority < 0 | 1 | 2 | ... >
Specify priority to use.
Supported Values:
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
■ qos < udp-port | tcp-port > ip-all range TCP/UDP-PORT TCP/UDP-PORT priority < 0 | 1 | 2 | ... >
Specify priority to use.
Supported Values:
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
protocol
■ [no] qos protocol < IP | IPX | ARP | ... >
Usage: [no] qos protocol <ip|ipx|arp|appletalk|sna|netbeui>
Description: Configure protocol-based priority. The priority can be
© 2009 Hewlett-Packard Development Company, L.P.
[priority <0-7>]
defined for any of the listed protocol types. The specified
priority value will be placed in the 802.1p priority field of
outgoing tagged packets. The protocol packets will also be
qos
431