HP ProCurve 5400zl Reference Manual page 590

Command Line Interface Reference Guide
Usage: show ipv6 routers vlan <VLANID>
Description: Show the IPv6 Router table entries.
Next Available Option:
vlan -- Show the IPv6 Router Table Entries for
■
rp-candidate
■ show ip pim rp-candidate
Usage: show ip pim rp-candidate [config]
Description: Show Candidate-RP operational and configuration information.
Next Available Option:
config -- Show C-RP configuration information.
■
rp-pending
■ show ip pim rp-pending
Show (*,*,RP) Join Pending Information.
rp-set
■ show ip pim rp-set
Usage: show ip pim rp-set [static|learned]
Description: Show RP-Set information available on the router.
Next Available Options:
static -- Show statically configured RP-Set information.
■
learned
■
running-config
■ show running-config
Usage: show running-config [status]
Description: Show the switch running configuration. If the status
Next Available Option:
status -- Check if the running configuration differs from the statup
■
© 2009 Hewlett-Packard Development Company, L.P.
When invoked without parameter shows current operational status
of the Candidate-RP.
When invoked without parameters shows all statically configured
and dynamically learned entries. If keyword 'static' is specified
the information about statically configured entries is shown.
If keyword 'learned' is specified the information learned from
the BSR is shown.
-- Show RP-Set information learned from the BSR.
keyword is specified check if there are changes in running
configuration not saved to startup configuration file.
VLAN.(p. 603)
(p. 540)
(p. 594)
(p. 565)
configuration.(p. 596)
show
588