HP ProCurve 5400zl Reference Manual page 115

Command Line Interface Reference Guide
Next Available Options:
append
■
operator
■
add the
manager
■
key(s).(p. 117)
■ copy command-output COMMAND-OUTPUT tftp IP-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy command-output COMMAND-OUTPUT tftp IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy command-output COMMAND-OUTPUT usb FILENAME
Specify filename for the USB transfer.
■ copy config < config1 | config2 | config3 > tftp IP-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy config < config1 | config2 | config3 > tftp IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy crash-data SLOT-ID-RANGE tftp IP-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-data SLOT-ID-RANGE tftp IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
© 2009 Hewlett-Packard Development Company, L.P.
-- Add the key(s) for operator
-- Replace the key(s) for operator access (default); follow with the 'append' option to
key(s).(p. 119)
-- Replace the key(s) for manager access; follow with the 'append' option to add the
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
access.(p. 102)
copy
113