Command Line Interface Reference Guide
Specify the IP address the request is for.
Next Available Options:
area
-- Specify an OSPF
■
cost
< 1 to 65535 > -- Set metric of this
■
■ [no] interface vlan VLAN-ID ip address IP-ADDR/mask-LENGTH
Interface IP address/mask.
■ [no] interface vlan VLAN-ID ip bootp-gateway IP-ADDR
IPv4 address of the BOOTP gateway.
■ [no] interface vlan VLAN-ID ip forward-protocol udp IP-ADDR
IP address of the protocol server.
Next Available Options:
port-num
■
port-name
■
■ [no] interface vlan VLAN-ID ip ospf IP-ADDR
Specify the IP address the request is for.
Next Available Options:
passive
■
area
-- Specify an OSPF
■
authentication-key
■
authentication
■
md5-auth-key-chain
■
cost
< 1 to 65535 > -- Set metric of this
■
dead-interval
■
hello-interval
■
priority
< 0 to 255 > -- Set priority of this router as a designated
■
retransmit-interval
■
transit-delay
■
■ [no] interface vlan VLAN-ID ip rip IP-ADDR
Specify the IP address the request is for.
Next Available Options:
authentication-type
■
authentication-key
■
metric
< 1 to 15 > -- Set metric for this
■
poison-reverse
■
receive
< V1-only | V2-only | V1-or-V2 | ... > -- Define RIP version for incoming
■
send
< disabled | V1-only | V1-compatible-V2 | ... > -- Define RIP version for outgoing
■
275)
rip-compatible
■
packets.(p. 274)
© 2009 Hewlett-Packard Development Company, L.P.
area.(p. 221)
-- UDP port number of the server. (TCP/UDP-PORT)
< dns | ntp | netbios-ns | ... > -- (NUMBER)
-- Configures an ospf interface as passive.
area.(p. 221)
-- Set simple authentication method and
-- Disable
authentication.(p. 223)
-- Set MD5 authentication method and key
< 1 to 65535 > -- Set dead interval in seconds; the default is
< 1 to 65535 > -- Set hello interval in seconds; the default is
< 1 to 3600 > -- Set retransmit interval in seconds; the default is
< 1 to 3600 > -- Set transit delay in seconds; the default is
< none | text > -- Set authentication type used on this
-- Set RIP authentication key (maximum 16
-- Enable/disable poison reverse on this
< V1-only | V2-only | V1-or-V2 > -- Define RIP version for incoming and outgoing
interface.(p. 229)
(p. 263)
(p. 258)
key.(p. 223)
interface.(p. 229)
interface.(p. 250)
interface.(p. 262)
(p. 263)
chain.(p. 250)
40.(p. 229)
10.(p. 236)
router.(p. 265)
5.(p. 273)
1.(p. 279)
interface.(p. 224)
characters).(p. 223)
packets.(p. 273)
packets.(p.
interface
242