HP ProCurve 5400zl Reference Manual page 116
Command line interface, switch software
Hide thumbs
Also See for ProCurve 5400zl:
- Installation and getting started manual (135 pages) ,
- Quickspecs (101 pages) ,
- Technical overview (65 pages)
Table of Contents
Advertisement
Command Line Interface Reference Guide
■ copy crash-data SLOT-ID-RANGE usb FILENAME
Specify filename for the USB transfer.
■ copy crash-data mm tftp IP-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-data mm tftp IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-data mm usb FILENAME
Specify filename for the USB transfer.
■ copy crash-data tftp IP-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-data tftp IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-data usb FILENAME
Specify filename for the USB transfer.
■ copy crash-log SLOT-ID-RANGE tftp IP-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-log SLOT-ID-RANGE tftp IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-log SLOT-ID-RANGE usb FILENAME
Specify filename for the USB transfer.
■ copy crash-log mm tftp IP-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-log mm tftp IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
■ copy crash-log mm usb FILENAME
Specify filename for the USB transfer.
■ copy crash-log tftp IP-ADDR FILENAME
© 2009 Hewlett-Packard Development Company, L.P.
copy
114
Advertisement
Table of Contents
