HP ProCurve 5400zl Reference Manual page 635

Command Line Interface Reference Guide
Next Available Option:
sec-model
■
■ [no] snmpv3 user
Configure SNMPv3 User entry.
Next Available Option:
username
■
username
■ snmpv3 user USERNAME
Set authentication paramaters.
Next Available Option:
auth -- Set authentication paramaters.
■
ver3
■ snmpv3 params PARAMS user USER sec-model ver3
SNMP version 3 security model.
Next Available Option:
message-processing
■
■ snmpv3 params PARAMS user USER sec-model ver3 message-processing ver3 < noauth | auth
| priv >
Set security level.
Supported Values:
■ noauth -- no authentication (and no privacy)
■ auth -- authentication (no privacy)
■ priv -- authentication and privacy
© 2009 Hewlett-Packard Development Company, L.P.
-- Set security model.
-- Set authentication paramaters. (ASCII-STR)
-- Set message processing model value.
(p. 631)
(p. 625)
(p. 633)
(p. 628)
snmpv3
633