HP ProCurve 5400zl Reference Manual page 461

Command Line Interface Reference Guide
auth-port
■ radius-server host IP-ADDR acct-port TCP/UDP-PORT auth-port TCP/UDP-PORT
Authentication UDP destination port number (default is 1812).
■ radius-server host IP-ADDR auth-port
Authentication UDP destination port number (default is 1812).
Next Available Option:
auth-port
■
(p. 459)
■ radius-server host IP-ADDR auth-port TCP/UDP-PORT
Authentication UDP destination port number (default is 1812).
Next Available Options:
acct-port
■
458)
key -- Encryption key to use with the RADIUS server (default is NULL). (ASCII-STR)
■
■ radius-server host IP-ADDR key KEY auth-port TCP/UDP-PORT
Authentication UDP destination port number (default is 1812).
dead-time
■ [no] radius-server dead-time
Server unavailability
form of command to set the dead-time to 0).
Supported Values:
■ Min
■ Max
Next Available Option:
dead-time
■
to set the dead-time to
■ radius-server dead-time < 1 to 1440 >
Server unavailability
form of command to set the dead-time to 0).
Range: < 1 to 1440 >
dyn-authorization
■ [no] radius-server host IP-ADDR dyn-authorization
Enable/disable dynamic authorization control from this host.
© 2009 Hewlett-Packard Development Company, L.P.
-- Authentication UDP destination port number (default is 1812). (TCP/UDP-PORT)
-- Accounting UDP destination port number (default is 1813). (TCP/UDP-PORT)
time (default is 0, use the 'no'
< 1 to 1440 > -- Server unavailability time (default is 0, use the 'no' form of command
0).(p. 459)
time (default is 0, use the 'no'
radius-server
(p.
(p. 460)
459