Command Line Interface Reference Guide
Next Available Options:
querier
-- Specify querier/non-querier capability for the
■
high-priority-forward
■
Multicast
auto
-- Instruct the device to monitor incoming multicast traffic on the specified ports (this is
■
the default behavior) ([ethernet] PORT-LIST)
blocked
■
ports ([ethernet] PORT-LIST)
fastleave
■
forcedfastleave
■
port is cascaded ([ethernet] PORT-LIST)
forward
■
ports ([ethernet] PORT-LIST)
increment
■ ip access-list resequence NAME < 1 to 2147483647 > < 1 to 2147483646 >
Specify the increment.
Range: < 1 to 2147483646 >
infinite
■ ip arp-age infinite
Causes the ARP timeout to be set to 0, indicating an infinite
timeout period.
interface
■ ip source-binding VLAN-ID IP-ADDR MAC-ADDR [ETHERNET] PORT-NUM
See ip source-binding command.
interval
■ ip igmp querier interval < 5 to 300 >
Sets the interval in seconds between IGMP queries
(default: 125)
Range: < 5 to 300 >
■ ip timep dhcp interval < 1 to 9999 >
Specify how often (in minutes) the switch tries to get the current time.
Range: < 1 to 9999 >
■ ip timep manual IP-ADDR interval < 1 to 9999 >
Specify how often (in minutes) the switch tries to get the current time.
Range: < 1 to 9999 >
■ ip timep manual IPV6-ADDR interval < 1 to 9999 >
© 2009 Hewlett-Packard Development Company, L.P.
available parameters use 'ip igmp ?'. To get a detailed help
for a parameter, follow it with 'help' keyword.
-- Enable/disable the high priority forwarding of traffic for subscribed IP
groups(p. 300)
-- Instruct the device to drop incoming multicast packets received on the specified
(p. 296)
-- Enables or disables IGMP Fast Leaves ([ethernet] PORT-LIST)
-- When enabled, this feature forces IGMP Fast Leaves to occur even when the
-- Instruct the device to forward incoming multicast packets received on the specified
(p. 300)
VLAN(p. 306)
(p. 296)
(p. 299)
ip
(p. 299)
301