Command Details - HP ProCurve 5400zl Reference Manual

Command Line Interface Reference Guide
informs
■
retries
■
timeout
■
(NUMBER)
address_ipv6
■
community
■
events
■
informs
■
retries
■
timeout
■
(NUMBER)
■ snmp-server
■ snmp-server
hpSwitchAuthMIB
■
617)
excluded
■
included
■
■ [no] snmp-server
(p. 619)
dst-ip-of-request
■
ip address in the snmp response pdu.
ip-addr -- IP Address for the source ip address field in the snmp response pdu. (IP-ADDR)
■
618)
loopback
■
configured ip address will be used as the source ip address in the snmp response pdu.
■ [no] snmp-server
ip-addr -- IP Address for the source ip address field in the trap pdu. (IP-ADDR)
■
loopback
■
configured ip address will be used as the source ip address in the trap pdu.

COMMAND DETAILS

address (p. 614)
address_ipv6 (p. 615)
arp-protect (p. 615)
auth-server-fail (p. 615)
community (p. 615)
contact (p. 616)
dhcp-snooping (p. 616)
dst-ip-of-request (p. 616)
dyn-ip-lockdown (p. 616)
enable (p. 616)
events (p. 616)
excluded (p. 616)
address
■ snmp-server host IP-ADDR
IP address of SNMP notification host.
Next Available Options:
community
■
informs
■
events < None | Debug | All | ... > --
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Specify if informs will be sent, rather than notifications.
< 0 to 255 > -- Specify the number of retries for informs.
< 1 to 21474836 > -- Specify the interval between retries for informs, in seconds.
(p. 620)
-- IPv6 address of SNMP notification host. (IPV6-ADDR)
-- Name of the SNMP community (up to 32 characters). (ASCII-STR)
< None | Debug | All | ... > --
-- Specify if informs will be sent, rather than notifications.
< 0 to 255 > -- Specify the number of retries for informs.
< 1 to 21474836 > -- Specify the interval between retries for informs, in seconds.
(p. 620)
location -- Description of the switch location. (ASCII-STR)
mib -- Enable/Disable SNMP support for the hpSwitchAuthentication MIB
-- Enable/Disable SNMP support for the hpSwitchAuthentication MIB
-- Disables SNMP support for the hpSwitchAuthentication MIB.
-- Enables SNMP support for the hpSwitchAuthentication MIB.
response-source
-- Destination Ip address of the snmp request pdu will be used as the source
< 0 to 7 > -- For the specified loopback interface, lexicographically minimum
trap-source -- Specify the source ip-address policy for the trap pdu
< 0 to 7 > -- For the specified loopback interface, lexicographically minimum
extended (p. 617)
host (p. 617)
hpSwitchAuthMIB (p. 617)
included (p. 618)
informs (p. 618)
ip-addr (p. 618)
link-change (p. 618)
location (p. 618)
login-failure-mgr (p. 619)
loopback (p. 619)
mib (p. 619)
password-change-mgr (p. 619)
-- Name of the SNMP community (up to 32 characters). (ASCII-STR)
-- Specify if informs will be sent, rather than
(p. 616)
-- Specify the source ip-address policy for the response pdu
(p. 616)
notifications.(p. 618)
(p. 616)
(p. 618)
(p. 620)
(p. 615)
(p. 618)
(p. 620)
(p. 618)
(p. 616)
(p. 618)
(p. 621)
(p. 618)
(p. 619)
port-security (p. 619)
response-source (p. 619)
retries (p. 620)
snmp-authentication (p. 620)
standard (p. 620)
timeout (p. 620)
traps (p. 621)
trap-source (p. 621)
view (p. 622)
write-access (p. 622)
(p. 615)
snmp-server
(p. 615)
(p. 619)
(p.
(p.
(p. 619)
614