Loading And Selecting A Slide Presentation - Polycom ViewStation FX4000 User Manual

Loading and Selecting a Slide Presentation

© Polycom, Inc. 2002
4. Select the line speed.
Select the call type (ISDN, IP, or AUTO).
5.
Note that if Auto H.323 Dialing is enabled on the ViewStation
FX or the VS4000 (Admin Setup > LAN/H.323 > H.323 > Setup),
the system will be able to auto-detect the type of call you are
placing (IP or ISDN) based on the video number format.
Consequently, the ISDN and H.323 fields on this Web page are
not visible.Auto H.323 Dialing is enabled by default.
6. Click the Call button.
To terminate your call:
Click the Hang Up button.
The following explains how to load a slide presentation from the PC
to the ViewStation FX or VS4000 using the Web interface and present
those slides in a video call.
The following lists key information about loading a presentation:
The ViewStation FX or VS4000 system is only compatible with
Microsoft PowerPoint 97 or higher.
Because the ViewStation FX or VS4000 does not have a hard
drive, the computer that is used to upload the presentation must
be left on during the presentation and the pcPresent application
window must be active.
You can load up to eight presentations on a ViewStation FX or
VS4000. Each presentation must originate on a separate PC.
The PC from which you are presenting cannot be running an
FTP service.
Chapter 7 - Using the System with a PC
Note
261