Show Sflow Linecard - Dell Z9500 Command Reference Manual

show sflow linecard

Display sFlow information for a line card.
Z9500
Syntax
show sflow linecard slot-id
Parameters
slot number
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.2.1.0
8.1.1.0
7.7.1.0
7.6.1.0
6.2.1.1
Usage
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in
Information
the following example below always displays a value of zero.
Example
Dell# show sflow linecard 0
Linecard 0
Dell# show sflow linecard 1
Linecard 1
Dell# show sflow linecard 2
Linecard 2
sFlow
Enter a slot number to view information on the line-card
ports in that slot. The range of Z9500 slot IDs is from 0 to 2.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Samples rcvd from h/w
Total UDP packets exported
UDP packets exported via RPM
UDP packets dropped
Samples rcvd from h/w
Total UDP packets exported
UDP packets exported via RPM
UDP packets dropped
:0
:0
:0
:0
:0
:0
:0
:0
1703