Download  Print this page

Trunk Name Assignment - Panasonic DBS 40 Operating Manual

Digital business system.
Hide thumbs


Chapter 2.
System Features

Trunk Name Assignment

Related Programming
Technical Manuals Online! -
You can display a name, number, or message of up to six characters on the
LCD in place of your CO trunk line number. The name will appear when a
CO call is ringing or connected.
For example, you can assign specific CO lines to different individuals or
departments. Then, when an extension rings, the individual's name or the
department's name will appear on the display, immediately identifying the
person for
call is intended.
whom the
While you are speaking on the extension, "CO TALK XXXXXX" will appear
on the LCD. (XXXXXX represents the six characters of the Trunk Name.)
While the extension is ringing, "rNCOMING XXXXXX" will appear. While
the extension is ringing and you are speaking on the extension at the same
time, "INCOMING XXXXXX" will appear on the second line of the display.
Trunk names can be assigned with a DSS.
If a text name is assigned to a CO trunk, the trunk number does not appear
on the display.
Section 700 - Operation


Table of Contents

   Also See for Panasonic DBS 40

   Related Manuals for Panasonic DBS 40

This manual is also suitable for:

Dbs 96Dbs 72

Comments to this Manuals

Symbols: 0
Latest comments: