Table of Contents
Advertisement
7.5. Check Handset Transmission
Cross Reference:
Signal Route
()
7.6. Check Handset Reception
Cross Reference:
Signal Route
()
*: Each measurement points are shown in
(Handset)
()
8. ADJUSTMENTS (BASE UNIT)
If your unit have below symptoms, adjust or confirm each item using remedy column from the
table.
The base unit dose not respond to a call from handset.
The base unit dose not transmit or the transmit frequency is off.
The transmit frequency is off.
The transmit power output is low, and the operating distance between
the base unit and
the handset is less than normal.
The reception sensitivity of base unit is low with noise.
The transmit level is high or low.
The reception level is high or low.
The unit does not link.
*: Refer to
Adjustment
CIRCUIT BOARD (Base Unit)
Symptom
().
21
() or
CIRCUIT BOARD
Remedy*
Make adjustments in item
Make adjustments in item
Make confirmation in item
Make confirmation in item
Make confirmation in item
Make confirmation in item
Make adjustments in item
Make confirmation in item
Advertisement
Table of Contents
