Answering System Features (Kx-Prx120 Only); Playing Messages; Tone/Pulse Setting - Panasonic KX-PRX120C Quick Manual

Getting Started

Answering system features (KX-PRX120 only)

Turning the answering system on and off
The answering system is already turned on at the time of purchase.
1
Tap [Landline] in the home screen or app list.
2
Tap [Answering system].
R The handset connects to the base unit.
3
Turn the [Answer] switch on or off.
R is displayed in the status bar while the answering system is turned on.

Playing messages

1
Tap [Landline] in the home screen or app list.
2
Tap [Answering system].
R The handset connects to the base unit.
R The number of messages is displayed at the top of the screen.
3
To play all new messages:
→ Tap [Play new message].
To play all messages:
→ Tap [Play all messages].
To play a specific message:
→ Tap [Message list] and then tap
Note:
R Messages that have been played have a checkmark next to them in the message list.
Voice guidance language
You can change the language used for the answering system's voice guidance.
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Voice prompt].
4
Select the desired language.

Tone/pulse setting

This setting must be set to match the dialing mode of your phone service, otherwise you will not
be able to make calls. (The default setting is [Tone].)
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Tone/pulse setting].
20
PRX120C_QG_(en-en)_1128_ver.010.pdf
next to the desired message.
20 2013/11/28 18:57:55