Call Forwarding - No Answer Time - Panasonic KX-TA1232 Programming Manual

[202] Call Forwarding — No Answer Time
Description
Sets the number of rings for Call Forwarding — No Answer feature. If a call is not answered
after the programmed number of rings, the call is forwarded to the destination.
Selection
Number of rings: 1 through 12
Default
3 rings
Programming
1.
Enter 202.
Display: 202 CALL FWD-NA
2.
Press NEXT.
Display example: Time: 3 rings
3.
Enter the number of rings.
To change the current entry, press CLEAR and enter the new number of rings.
4.
Press STORE.
5.
Press END.
Conditions
• One ring is equivalent to five seconds.
• This timer is also used for Intercept Routing. If an incoming DISA (Direct Inward System
Access) call to the Intercept Routing destination is not answered before this timer expires,
the call will be disconnected.
• You cannot leave the entry empty.
Features Guide References
Call Forwarding — Busy / No Answer
Call Forwarding — No Answer
Programming Guide
General Programming
83