Section 4 Web User Interface Programming
Busy (Enable Call Forward)
Description
Value Range
Default Value
Busy (Phone Number)
Description
Value Range
Default Value
No Answer (Enable Call Forward)
Description
96
Administrator Guide
Selects whether to forward incoming calls to a specified destination
when the line is in use.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
•
If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
•
Yes
•
No
No
Specifies the phone number of the destination to forward calls to when
the line is in use.
Max. 32 characters
Note
•
You cannot leave this field empty if [Busy (Enable Call
Forward)] is set to [Yes].
Not stored.
Selects whether to forward incoming calls to a specified destination
when a call is not answered after it has rung a specified number of
times.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
•
If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
Document Version 2011-11