Honda 2004 Odyssey Service Manual page 122

11. If you are not replacing the front bearing and/or
rear bearing, go to step 18. Otherwise, remove the
rotor from the stator drive end housing.
12. Inspect the rotor shaft for galling, and inspect the
bearing journal surface in the stator housing for
seizure marks.
• If either the rotor or stator housing is damaged,
replace the alternator.
• If both the rotor and the stator housing are OK,
go to step 13.
13. Remove the rear bearing using a puller as shown.
14. With a hammer and commercially available tools
shown, install a new rear bearing in the rotor shaft.
15. Remove the front bearing retainer plate.
(cont'd)
4-35