Honda 2004 Odyssey Service Manual page 117

Charging System
Auto-tensioner Replacement (cont'd)
2002-2004 models
1. Remove the alternator-compressor belt (see page
4-26).
2. Remove the auto-tensioner.
3. Clean the tensioner and pivot bolt (A), and clean the
threads of the pivot bolt hole (B) with a tap.
B
C
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
4. Install the auto-tensioner and tighten the mounting
bolt (C), then screw the pivot bolt in by hand until it
is finger-tight.
4-30
5. After tightening, tighten the pivot bolt in two steps
(45° per step).
Specified Torque:
64 N·m (6.5 kgf·m, 47 lbf·ft)
45°
45°
A