Governor Body - Toyota 4-Runner 1985 Repair Manual

AT-gO
•
AUTOMATIC TRANSMISSION - Component Groups (Governor Body)
Non-reusable part
C2414
C241S
Governor Body
~--------E-Ring
@1-------GovernOrWeight
r1-
~------Governor
Valve
I ' - - - - - - - ; s p r i n g
! - - - - - - G o v e r n o r Valve Shaft
If •
Locking Plate
,
Governor Body
DISASSEMBLY OF GOVERNOR BODY
1. REMOVE E-RING AND GOVERNOR WEIGHT
ATOO14
Compress the spring by pushing up on the shaft and down
on the weight. Remove the E-ring with a screwdriver. Lift
off the governor weight.
2. REMOVE GOVERNOR VALVE
Slide it down through the bore.
3. REMOVE RETAINING CLIP
Remove the end, indicated by an. arrow, being careful not
to scratch the governor body.