FUEL SYSTEM - Carburetor
FU-13
FU0273
FU0280
FU0281
FU0272
FU0271
ASSEMBLY OF CARBURETOR
NOTE:
Use new gaskets and a-rings throughout.
Assembly of Carburetor Body
(See page FU-4)
1.
ASSEMBLE CARBURETOR BODY AND FLANGE
(a)
Place a new gasket and flange in position on the body.
(b)
Install the three screws.
2.
INSTAl.L AUXILIARY ACCELERATION PUMP IN ORDER,
AS SHOWN:
(a)
Diaphragm (with outer gasket)
(b)
Spring
(c)
Cover
(d)
Screws
3.
INSTALL ACCELERATION PUMP IN ORDER AS SHOWN:
(a)
Spring
(b)
Diaphragm (with outer gasket)
(c)
Cover
(d)
Boot
(e)
Screws
4.
INSTALL CHOKE OPENER
Install the choke opener, and connect the link.
5.
INSTALL IDLE-UP DIAPHRAGM
Install the idle-up diaphragm, and connect the link.