Toyota 4-Runner 1985 Repair Manual page 466

AT-64
AUTOMATIC TRANSMISSION -
Component Groups (Planetary Gear Output Shaft)
15. TEMPORARILY INSTALL REACTION PLATE ON
PLANETARY
Insert it into place for test of the one-way clutch.
16. TEST ONE-WAY CLUTCH
The planetary gear must rotate freely counterclockwise and
lock clockwise.
If the clutch does not work correctly, it must be replaced.
1
7. REMOVE REACTION PLATE
18. INSTALL THRUST WASHER ON FRONT PLANETARY
CARRIER
Apply petroleum jelly to the washer to hold it in place dur-
ing assembly later. Match the lugs with the planetary car-
rier when installing.
19. INSTALL FRONT PLANETARY GEAR ASSEMBLY TO
INTERMEDIATE SHAFT
20. INSTALL PRESSURE PLATE
Install the pressure plate facing the flat surface toward the
intermediate shaft.
21. INSTALL NO.3 BRAKE CLUTCH PACK
Using the low-pressure compressed air, blow all excess ATF
from the discs.
CAUTION: High-pressure air will damage the discs.
Install in order: Disc-plate-disc-plate-disc-plate-disc-
plate-disc
22. KEEP REACTION PLATE, APPLY TUBE, THRUST BEARING
AND RACE TOGETHER