Toyota 4-Runner 1985 Repair Manual page 392

o
o
MANUAL TRANSMISSION - G 52 Transmission
MT-61
GMOO28
GM0027
GM0026
GM0025
GM0081 GM0082
23. MEASURE COUNTER FIFTH GEAR THRUST CLEARANCE
Using a feeler gauge, measure the counter 5th gear thrust
clearance.
Standard clearance:
Maximum clearance:
0.10 - 0.30 mm
(0.0039 - 0.0118 in.)
0.30 mm (0.0118 in.)
24. INSTALL REVERSE SHIFT ARM TO REVERSE SHIFT ARM
BRACKET
Install the reverse shift arm to the pivot of the reverse shift
arm bracket.
25. INSTALL REVERSE IDLER GEAR AND SHAFT
(a) Install the reverse idler gear on the shaft.
(b) Align the reverse shift arm shoe to the reverse idler
gear groove and insert the reverse idler gear shaft to
the intermediate plate.
(c) Install the reverse idler gear shaft stopper and torque
the bolt.
Torque:
175
kg-em
(13
ft-Ib,
17
N·m)
26. INSTALL SHIFT FORK SHAFT NO.2, SHIFT FORK NO.1
AND NO.2
Place shift forks No.1 and No.2 into the groove of hub
sleeves No.1 and No.2 and install fork shaft No.2 to shift
forks No.1 and No.2 through the intermediate plate.
27. INSTALL INTERLOCK PIN
(a) Apply MP grease to the interlock pins.
(b) Using a magnetic finger and screwdriver, install the
interlock pin into the intermediate plate.