Toyota 4-Runner 1985 Repair Manual page 63

EM-34
ENGINE MECHANICAL - Cylinder Head
~
EM0815
11. REMOVE BOND CABLE OF REAR SIDE
12. REMOVE DISTRIBUTOR AND SPARK PLUGS
13. IF VEHICLE HAS POWER STEERING, REMOVE VANE
PUMP WITH BRACKET
(a) Remove the drive belt.
(b) Remove the vane pump with the bracket.
NOTE: Lay the vane pump to one side without discon-
necting the hoses.
REMOVAL OF CYLINDER HEAD
(See page EM-12)
1. REMOVE HEAD COVER (See step 1 on page EM-15)
2.
REMOVE CAM SPROCKET BOL T
(See step 2 on page EM-15)
3.
REMOVE DISTRIBUTOR DRIVE GEAR AND FUEL PUMP
DRIVE CAM (See step 3 on page EM-15)
4.
REMOVE CAM SPROCKET
(See step 4 on page EM-16)
5. REMOVE CHAIN COVER BOL T
(See step 5 on page EM-16)
6.
REMOVE CYLINDER HEAD BOL TS
(See step 6 on page EM-16)
7. REMOVE ROCKER ARM ASSEMBLY
(See step 7 on page EM-16)
. 8.
REMOVE CYLINDER HEAD
(See step 8 on page EM-16)