Toyota 4-Runner 1985 Repair Manual page 389

MT-58
j
MANUAL TRANSMISSION - G 52 Transmission
GM0071
I
GMOO73
GM0072
GMOO74
GM0075
11. INSTAll SLEEVE TO OUTPUT SHAFT
Using a plastic hammer, tap the sleeve onto the outl"'1 It
shaft.
12. INSTAll OUTPUT SHAFT TO INTERMEDIATE PLATE
Install the output shaft into the intermediate plate by pull-
ing on the output shaft and tapping on the intermediate
plate.
13. INSTALL INPUT SHAFT
(a) Apply
MP
grease to the 14-needle roller bearing and
install it into the input shaft.
(b) Install the input shaft to the output shaft with the syn-
chronizer ring slots aligned with the shifting keys.
14. INSTAll COUNTER GEAR
Install the counter gear into the intermediate plate while
holding the counter gear, and install the counter rear bearing
with SST.
SST 09316-60010