Inspection Of Transmission Components - Toyota 4-Runner 1985 Repair Manual

MT-50
MANUAL TRANSMISSION -
G 52 Transmission
GM0048
WM0057
GM0049
WM0059
GM0050
INSPECTION OF TRANSMISSION COMPONENTS
1. INSPECT OUTPUT SHAFT AND INNER RACE
(a) Using calipers, measure the output shaft flange
thickness.
Minimum thickness: 4.80 mm (0.1890 in.)
(b) Using calipers, measure the inner race flange
thickness.
Minimum thickness: 3.99 mm (0.1571 in.)
(c) Using a micrometer, measure the outer diameter of
the output shaft journal.
Minimum diameter:
2nd gear 37.984 mm (1.4954 in.)
3rd gear 34.984 mm (1.3773 in.)
(d) Using a micrometer, measure the outer diameter of
the inner race.
Minimum diameter: 38.985 mm (1.5348 in.)
(e) Using a dial indicator, check the shaft runout.
Maximum runout: 0.05 mm (0.0020 in.)