Toyota 4-Runner 1985 Repair Manual page 96

ENGINE MECHANICAL - Cylinder Block
6. INSTALL RADIATOR WITH SHROUD
(a) Install the radiator with the shroud.
(b) Connect the reservoir hose.
EM-67
(c) Connect the radiator upper and lower hoses to the
engine.
(d) Connect the two cooler hoses (with A/T)
7. INSTALL COUPLING FAN WITH FAN
8. INSTALL AIR CLEANER HOSE AND AIR CLEANER
9. FILL WITH ENGINE OIL
Fill the engine with new oil, API grade SF or SF/CC multi-
grade, fuel efficient and recommended viscosity oil.
Capacity:
Dry fill 4.8 liters (5.1 US qts. 4.2 Imp. qts)
Drain and refill
w
10
Oil filter change
4.0 liters (4.2 US qts, 3.5 Imp. qts)
w
I
Oil filter change
4.6 liters (4.9 US qts, 4.0 Imp. qts)
10. FILL WITH COOLANT
Close the radiator and engine drain cocks and fill with
coolant.
Total capacity: w/Heater 8.4 liters
(8.9 US qts, 7.4 Imp. qts)
11. INSTALL ENGINE UNDER COVER
12. INSTALL AND ADJUST HOOD (See page BO-2)
13. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY
14. START ENGINE
Warm up the engine and inspect for leaks.
15. PERFORM ENGINE ADJUSTMENT
16. ROAD TEST
Perform a road test
17. RECHECK COOLANT AND ENGINE OIL LEVEL