Toyota 4-Runner 1985 Repair Manual page 384

MANUAL TRANSMISSION -
G52 Transmission
MT-53
WMoon
WM0073
WM0176
WM0077
GMOO54
(b) Using SST, press in the oil seal.
SST 09223-50010
Oil seal depth: 11.2 - 12.2 mm (O.441 - 0.480 in.)
Transmission case installation surface
8. IF NECESSARY, REPLACE COUNTER GEAR FRONT
BEARING
(a) Using snap ring pliers, remove the snap ring.
(b) Using SST, press out the bearing.
SST 09950-00020
(c) Replace the side race.
(d) Using a socket wrench, press in the bearing, side race
and inner race.
(e) Select a snap ring that will allow minimum axial play
and install it on the shaft.
Mark Thickness
mm (in.)
1 2.05 - 2.10 (0.0807 - 0.0827)
2 2.10 - 2.15
(0.0827 - 0.0846)
3
2.15 - 2.20 (0.0846 - 0.0866)
4 2.20 - 2.25 (0.0866 - 0.0886)
5 2.25 - 2.30
(0.0886 - 0.0906)
6 2.30 - 2.35 (0.0906 - 0.0925)
9. IF NECESSARY, REPLACE REVERSE RESTRICT PIN
(a) Using a torx socket wrench, remove the screw plug.