MANUAL TRANSMISSION -
G 52 Transmission
MT-45
GM0025
GM0026
GM0027
GMOO28
GM0029
15. REMOVE SHIFT FORK SHAFT NO.2, SHIFT FORK NO.2
AND SHIFT FORK NO.1
Pull out shift fork shaft No.2 and remove shift fork No.2
and No.1.
16. REMOVE REVERSE IDLER GEAR AND SHAFT
(a)
Remove the reverse idler gear shaft stopper.
(b)
Remove the reverse idler gear and shaft.
17. REMOVE REVERSE SHIFT ARM FROM REVERSE SHIFT
ARM BRACKET
18. MEASURE COUNTER FIFTH GEAR THRUST
CLEARANCE
Using a feeler gauge, measure the counter 5th gear thrust
clearance.
Standard clearance:
Maximum clearance:
0.10 - 0.30 mm
(0.0039 - 0.0118 in.)
0.30 mm (0.0118 in.)
19. REMOVE GEAR SPLINE PIECE NO.5, SYNCHRONIZER
RING, NEEDLE ROLLER BEARINGS AND COUNTER FIFTH
GEAR WITH HUB SLEEVE NO.3
(a)
Engage the gear double meshing.
(b)
Using a hammer and chisel, loosen the staked part of
the nut.