Toyota 4-Runner 1985 Repair Manual page 382

MANUAL TRANSMISSION - G 52 Transmission MT-51
WM0061
GMOOSl
WM0064
WM0066
2. CHECK OIL CLEARANCE OF FIRST GEAR
Using a dial indicator, measure the oil clearance between
the gear and inner race with the needle roller bearing in-
stalled.
Standard clearance:
Maximum clearance:
0.009 - 0.032 mm
(0.0004 - 0.0013 in.)
O. 15 mm (0.0059 in.)
3. CHECK OIL CLEARANCE OF SECOND, THIRD AND
COUNTER FIFTH GEARS
Using a dial indicator, measure the oil clearance between
the gear and shaft with the needle roller bearing installed.
Standard clearance:
2nd and 3rd gears 0.009 - 0.033 mm
(0.0004 - 0.0013 in.)
Counter 5th gear 0.009 - 0.032 mm
(0.0004 - 0.0013 in.)
Maximum clearance: 0.15 mm (0.0059 in.)
4. INSPECT SYNCHRONIZER RINGS
(a) Turn the ring and push it in to check the braking action.
(b) Measure the clearance between the synchronizer ring
back and the gear spline end.
Standard clearance: 1.0 - 2.0 mm
(0.039 - 0.079 in.)
Minimum clearance: 0.8 mm (0.031 in.)
5. MEASURE CLEARANCE OF SHIFT FORKS AND HUB
SLEEVES
Using a feeler gauge, measure the clearance between the
hub sleeve and shift fork.
Maximum clearance: 1.0 mm (0.039 in.)