Toyota 4-Runner 1985 Repair Manual page 215

FI-46
------~~~
,//,--'
EFI SYSTEM - Fuel System
FI0249
F 10493
F 10492
5. REMOVE FUEL PUMP FILTER FROM FUEL PUMP
(a) Remove the rubber cushion.
(b) Remove the clip and pull out the filter.
INSTALLATION OF FUEL PUMP
(See page
FI-45)
1. INSTALL FUEL PUMP FILTER TO FUEL PUMP
2. INSTALL FUEL PUMP TO FUEL PUMP BRACKET
(a) I nsert the outlet port of the fuel pump into the fuel
hose.
(b) I nstall the rubber cushion to the lower side of the fuel
pump.
(c) Push the lower side of the fuel pump, together with
the rubber cushion, into the fuel pump bracket.
3. INSTALL FUEL PUMP BRACKET
(a) Place the bracket with a new gasket on the fuel tank.
(b) I nstall the tighten the seven bolts.
4. INSTALL FUEL TANK
When installing the fuel tank, refer to F I-55 for the instal-
lation position of the protector and hose and the tighten-
ing torque.
After installation, check for leaks.