Cold Start Injector - Toyota 4-Runner 1985 Repair Manual

Injection
EFI SYSTEM - Fuel System
FI-47
Cold Start Injector
Wiring Connector
FI0012
FI0013
Fuel
..
Ignition
Switch
+8 ~--+-a
Cold Start
ST Injector
Solenoid Coil
Start Injector
Time Switch
Point
REMOVAL OF COLD START INJECTOR
REMOVE COLD START INJECTOR
(a) Disconnect the cold start injector wire.
(b) Remove the fuel pipe between the cold start injector
and fuel del ivery pipe.
(c) Remove the cold start injector wire gasket.
(d) Put a suitable container or shop towel under rear end
of the delivery pipe.
INSPECTION OF COLD START INJECTOR
1. MEASURE RESISTANCE OF COLD START INJECTOR
Using an ohmmeter, check the resistance of the injector.
Resistance: 2 - 4
n